Ingeniously easy to set up.
Here's how: |
| Assembly: |
- Unscrew the stainless steel tube.
- Remove all grill elements:
- 1 thick tube with a stopper
- 1 thin tube with a cleaning groove
- 2 outer grill rods with hooks
and threads
- 10 grill rods
- 4 grill feet
|
- Place both tubes with the
threaded holes for the feet facing upwards. The holes of
the thick tube and the grooves of the thin tube must be
opposite each other.
- The outer grill rods with a
thread are pushed through
the thin tube and fixed to
the thick tube with an initial single turn.
- Screw the stopper back on to the thick tube (to avoid
it
being lost).
- Insert the 10 grill rods.
- Screw the outer grill rods with the hooks fully into the
thick tube.
- Screw the four grill feet tight and turn the grill over.
- Finished and ready for use.
|
